Cheap Lee Valley JessEm Clear-Cut Table Saw Stock Guides

By keeping work registered against both the fence and the surface of the machine table, these stock guides improve safety and accuracy on a table saw or shaper.

To restrict lift, the fence-mounted guides are spring tensioned to keep them set snug against the top of the stock. The rollers also have a 5° feed bias that helps draw the work inward, keeping it fully registered against the fence.

The wear-resistant urethane tires provide good traction on the work, and one-way bearings ensure the correct feed direction to help prevent kickbacks.

The guides pivot for height adjustment, with a maximum stock capacity of 13/16″ above the mounting surface, and extend up to 2 3/4″ from the face of the mounting bracket. Infeed and outfeed rollers can be spaced up to 22 3/4″ apart.

The paired guides are set in an included 30″ long aluminum T-track extrusion that mounts permanently to the top of most fence models that use a square steel tube or extrusion with 1/4″ T-slots.

Largely made from anodized aluminum and stainless steel, the guides have excellent fit and finish. Mounting screws, a drill bit for pilot holes, a T-25 Torx driver and a 1/8″ hex key are included. An effective way to greatly improve stock control.

For owners of the Incra fence, an accessory mounting kit is available separately.

Made in Canada.